|
Accessories
|
|
All MadgeTech Accessories are listed with this directory. Click on any photo or link to take you to the accessory details page.
|
|
|
Level1000-O-Ring
One set of replacement o-rings for Level1000.
|
|
|
|
|
|
|
|
|
|
|
Level2000-O-Ring
One set of replacement o-rings for Level2000.
|
|
|
|
|
|
|
|
|
|
|
MicroTemp-O-Ring
One set of replacement o-rings for MicroTemp.
|
|
|
|
|
|
|
|
|
|
|
PRTemp1000-O-Ring
One set of replacement o-rings for PRTemp1000 Series (not available for Intrinsically Safe products)
|
|
|
|
|
|
|
|
|
|
|
PRTrans1000-O-Ring
One set of replacement o-rings for PRTrans1000 Series (not available for Intrinsically Safe products)
|
|
|
|
|
|
|
|
|
|
|
RHTemp1000-O-Ring
One set of replacement o-rings for RHTemp1000, RHTemp1000SS (not available for Intrinsically Safe products)
|
|
|
|
|
|
|
|
|
|
|
TCTemp1000-O-Ring
One set of replacement o-rings for TCTemp1000.
|
|
|
|
|
|
|
|
|
|
|
TEMP-1000-O-RING
One set of replacement o-rings for Temp1000, Temp1000SS (not available for Intrinsically Safe products)
|
|
|
|
|
|
|
|
|
|
|
Temp1000P-O-Ring
One set of replacement o-rings for Temp1000P
|
|
|
|
|
|
|
|
|
|
|
3B5700
150°C ½ AA High Temperature Battery
|
Type: Batteries
Weight: 2oz
|
|
|
|
|
|
|
|
|
CR1225
Coin cell for previous revision of MicroRHTemp
|
Type: Batteries
Weight: 0.1oz
|
|
|
|
|
|
|
|
|
CR1632
Coin Cell for MicroRHTemp-EB
|
Type: Batteries
Weight: 0.4oz
|
|
|
|
|
|
|
|
|
CR2032
Coin cell for In-Transit recorders(-20 to+70°C operating environment)
|
Type: Batteries
Weight: 0.1oz
|
|
|
|
|
|
|
|
|
ER14250
3.6 Volt, Lithium 1000 mAH
|
Type: Batteries
Weight: 0.4oz
|
|
|
|
|
|
|
|
|
LTC-3PN (BL-4PN)
Note: These batteries are only equipped with two leads and for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
|
Type: Batteries
Weight: 0.3oz
|
|
|
|
|
|
|
|
|
LTC-7PN
Note: These batteries are only equipped with two leads and for use with MadgeTech data loggers. For additional configurations, please contact MadgeTech Sales.
|
Type: Batteries
Weight: 0.4oz
|
|
|
|
|
|
|
|
|
MN1300
D-cell Alkaline Battery
|
Type: Batteries
Weight: 6oz
|
|
|
|
|
|
|
|
|
MN1500
AA Battery
|
Type: Batteries
Weight: 1oz
|
|
|
|
|
|
|
|
|
SR1154W
Coin Cell for the MicroRHTemp, aka 357 or 303
|
Type: Batteries
Weight: 0.4oz
|
|
|
|
|
|
|
|
|
TL-2150
3.6V Lithium Battery, 1/2 AA, Axial Leads, -40 to +80°C
|
Type: Batteries
Weight: 0.5oz
|
|
|
|
|
|
|
|
|
TL-5955
Lithium Battery, 2/3AA axial leads, for BTIF1000
|
Type: Batteries
Weight: 0.5oz
|
|
|
|
|
|
|
|
|
TLH-5902
3.6V Lithium Battery, 1/2 AA, Axial Leads, -40 to +125°C
|
Type: Batteries
Weight: 0.5oz
|
|
|
|
|
|
|
|
|
U9VL-J
9.0 Volt, Lithium Battery, 1200 mAH
|
Type: Batteries
Weight: 2.5oz
|
|
|
|
|
|
|
|
|
DC9V-EU
Wall mounted 230VAC@50Hz/9VDC power adapter. (European model)
|
Type: Cables/Software
Weight: 6oz
|
|
|
|
|
|
|
|
|
DC9V-NA
Wall mounted 120VAC/9VDC power adapter. (North American model)
|
Type: Cables/Software
Weight: 6oz
|
|
|
|
|
|
|
|
|
IFC102
For Micro Series - includes software, manual, mini-plug adapter and RS232 (IFC110) computer interface cable.
Note: USB drivers are compatible with Vista and Windows 7 32 bit systems, not Vista and Windows 7 64 bit systems.
|
Type: Cables/Software
Weight: 6.5oz
|
|
|
|
|
|
|
|
|
IFC103
For TransiTemp-EC Series includes software, manual and RS232 computer interface cable with EC connector.
Note: USB drivers are compatible with Vista and Windows 7 32 bit systems, not Vista and Windows 7 64 bit systems.
|
Type: Cables/Software
Weight: 5oz
|
|
|
|
|
|
|
|
|
IFC110
For Standard Series includes software, manual and RS232 computer interface cable
Note: USB drivers are compatible with Vista and Windows 7 32 bit systems, not Vista and Windows 7 64 bit systems.
|
Type: Cables/Software
Weight: 12oz
|
|
|
|
|
|
|
|
|
IFC200
For Standard Series includes software, manual, Quick Start Guide and USB computer interface cable.
Note: USB drivers are compatible with Vista and Windows 7 32 bit systems, not Vista and Windows 7 64 bit systems.
|
Type: Cables/Software
Weight: 11oz
|
|
|
|
|
|
|
|
|
IFC202
IFC200 With Adapter. For Micro Series - includes software, manual, Quick Start Guide, mini-plug adapter and USB computer interface cable.
Note: USB drivers are compatible with Vista and Windows 7 32 bit systems, not Vista and Windows 7 64 bit systems.
|
Type: Cables/Software
Weight: 5.5oz
|
|
|
|
|
|
|
|
|
IFC300
USB Docking Station
Note: USB drivers are compatible with Vista and Windows 7 32 bit systems, not Vista and Windows 7 64 bit systems.
|
Type: Cables/Software
Weight: 6.3oz
|
|
|
|
|
|
|
|
|
RFC101A
Radio frequency receiver for wireless, RF series data recorders, includes software, manual, power supply and RS232 (IFC110) computer interface cable.
Note: USB drivers are compatible with Vista and Windows 7 32 bit systems, not Vista and Windows 7 64 bit systems.
|
Type: Cables/Software
Weight: 4.5oz
|
|
|
|
|
|
|
|
|
RFC101A-CO
RFC101A and power adapter
Note: USB drivers are compatible with Vista and Windows 7 32 bit systems, not Vista and Windows 7 64 bit systems.
|
Type: Cables/Software
Weight: 4.5oz
|
|
|
|
|
|
|
|
|
RFC200A
Radio frequency receiver for RF series (includes RFC101A, USB-1, IFC200, Software)
Note: USB drivers are compatible with Vista and Windows 7 32 bit systems, not Vista and Windows 7 64 bit systems.
|
Type: Cables/Software
Weight: 4.5oz
|
|
|
|
|
|
|
|
|
SVP Secure
IQ/OQ/PQ Secure software validation package (includes IQ/OQ/PQ document and validation workbook)
|
Type: Cables/Software
Weight: 16oz
|
|
|
|
|
|
|
|
|
SVP-Standard
IQ/OQ/PQ Standard software validation package (includes IQ/OQ/PQ document and validation workbook)
|
Type: Cables/Software
Weight: 16oz
|
|
|
|
|
|
|
|
|
USB-1
USB to RS232 converter cable
Note: Keyspan USB drivers are compatible with Vista and Windows 7 64 bit systems.
|
Type: Cables/Software
Weight: 5.5oz
|
|
|
|
|
|
|
|
|
USB101
Includes software, manual, RS232 (IFC110) computer interface cable and USB to RS232 converter cable.
Note: Keyspan USB drivers are compatible with Vista and Windows 7 64 bit systems.
|
Type: Cables/Software
Weight: 11.5oz
|
|
|
|
|
|
|
|
|
7001-CO2 Monitor
For monitoring carbon dioxiode levels in Indoor Air Quality (IAQ) studies and many other applications. Large LCD display shows CO2 levels, temperature and ventilation rates in standard or metric units. Can be used with optional, MadgeTech Voltage recorders (sold seperately) for recording and analyzing time and date stamped data with MadgeTech software. CO2 monitor, AC adapter and User's Manual included.
|
Type: Carbon Dioxide
Weight: 25oz
|
|
|
|
|
|
|
|
|
Cable2070
CO2 monitor to data recorder interface cable
|
Type: Carbon Dioxide
Weight: 2oz
|
|
|
|
|
|
|
|
|
970HCA
Split core current tranducer, monitors 0-50,100 or 200ADC (slide switch selectable). No status LED's, outputs a 4-20mA and 0-50VDC signal (requires external power).
|
Type: Current Switches
Weight: 4.3oz
|
|
|
|
|
|
|
|
|
CT-800
Solid core current switch, monitors 1-250Amps, sensor trips at 1Amp. Switch can be used for both AC and DC circuits.
|
Type: Current Switches
Weight: 4.5oz
|
|
|
|
|
|
|
|
|
CT-805
Split Core current switch, monitors 1.5-250Amps, sensor trips at 1.5Amps. Switch can be used for both AC and DC circuits.
|
Type: Current Switches
Weight: 4.5oz
|
|
|
|
|
|
|
|
|
CT-815
Split core current switch, mointors 1.5-150Amps. Adjustable set point and status LED's.
|
Type: Current Switches
Weight: 4.5oz
|
|
|
|
|
|
|
|
|
CT-H10F
Split core current switch, monitors 3.5-100Amps, adjustable set point between 3.5-100Amps, auto calibration, status LED's, outputs a 4-20mA signal.
|
Type: Current Switches
Weight: 2.5oz
|
|
|
|
|
|
|
|
|
CT-H600
Split core current relay switch, monitors 0.15 to 200Amps, fixed setpoints at 0.15Amps max, no status LED's.
|
Type: Current Switches
Weight: 2.5oz
|
|
|
|
|
|
|
|
|
CT-H608
Split core current relay switch, monitors 1.25-50Amps, adjustable set point between 1.25-50Amps, status LED's.
|
Type: Current Switches
Weight: 2.5oz
|
|
|
|
|
|
|
|
|
HiTemp150-TS
The HiTemp150-TS is a thermal shield
for use with the HiTemp150 data logger.
This durable enclosure can withstand
temperatures up to 250°C .
The device is easy to use, simply open the enclosure, insert the HiTemp150, thread the probe through the end cap and latch it back onto the barrier body.
The HiTemp150-TS is built for use in
applications that require extreme
temperature monitoring, such as peanut
roasting and food processing.
|
Type: Enclosures
Weight: 10.4oz
|
|
|
|
|
|
|
|
|
ThermoVault1000
The ThermoVault1000 is a stainless steel thermal barrier for use with the Temp1000P or Temp1000FP. This durable enclosure is submersible and can withstand temperatures up to 350°C (230°C with O-Ring).
The device is easy to use, simply open the enclosure, insert a data logger, thread the probe through the end cap and latch it back onto the barrier body.
The Thermovault1000 is built for use in applications that
required extreme temperature monitoring, such as with furnace profiling, geothermal down-hole recording, and oven data logging.
|
Type: Enclosures
Weight: 51.2oz
|
|
|
|
|
|
|
|
|
Waterbox110C
Water resistant enclosure with cable gland. Measures 3.5"×2.75"×.75".
|
Type: Enclosures
Weight: 7oz
|
|
|
|
|
|
|
|
|
Tibbo DS203R
The Tibbo DS203R allows MadgeTech Data Loggers to be accessed over a network. This allows for a logger to be placed in remote locations and maintain communications to control and/or monitor the device by creating a serial tunnel (virtual RS232 connection). The DS202R is a simple, yet powerful device, that is useful in many applications where a typical serial device may be used. The Tibbo DS203R is intended for use within network communications, making it quite useful for remote data logging. One Tibbo DS203R can effectively network-enable a single data logger.
|
Type: Ethernet
Weight: 14.1oz
|
|
|
|
|
|
|
|
|
SHOCK-EB-MAG-KIT
Magenetic mounting kit for the Shock101-EB, UltraShock-EB, and TSR101-EB.
|
Type: Mounting Kits
Weight: 31oz
|
|
|
|
|
|
|
|
|
SHOCK-MAG-KIT
Magenetic mounting kit for the Shock101, UltraShock, and TSR101.
|
Type: Mounting Kits
Weight: 31oz
|
|
|
|
|
|
|
|
|
WM-300
The WM-300 is a wall-mounting station that
is built for use with the Cryo-Temp, TransiTempII, or the TransiTempII-RH. It can be mounted using the adhesive tape along the back or it can be screwed to a wall or any flat surface.
|
Type: Mounting Kits
Weight: 3oz
|
|
|
|
|
|
|
|
|
pH1
General Purpose pH probe for use with the pHTemp101. Features standard BNC connector. Clear, epoxy-bodied, gel-filled combination electrode measures the entire 0 to 14pH range. Soaker storage bottle included.
|
Type: pH Probe
Weight: 7.5oz
|
|
|
|
|
|
|
|
|
RTDS-4-3/16-12-36
12-36 precision 100 Ohm, 4 wire RTD probe
|
|
|
|
|
|
|
|
|
|
|
RTDS-4-3/16-6-36
6-36 precision 100 Ohm, 4 wire RTD probe
|
|
|
|
|
|
|
|
|
|
|
RTDSMS-4-3/16-12-36
12-36 precision 100 Ohm, 4 wire RTD probe
|
|
|
|
|
|
|
|
|
|
|
RTDSMS-4-3/16-6-36
6-36 precision 100 Ohm, 4 wire RTD probe
|
|
|
|
|
|
|
|
|
|
|
TC-J-TT-24-36-SMP
Choose "More Details" to view the selections of thermocouple probes offered.
|
Type: Probe
Weight: 0.5oz
|
|
|
|
|
|
|
|
|
TJ36-CASS-316U-12-SMPW-M
Type K, 304 SS 3/16" dia., 12" sheath, 36" lead wire.
Temperature range for sheath: 900°C
Temperature range for lead wire: 260°C
|
|
|
|
|
|
|
|
|
|
|
TJ36-CASS-316U-6-SMPW-M
Type K, 304 SS 3/16" dia., 6" sheath, 36" lead wire.
Temperature range for sheath: 900°C
Temperature range for lead wire:
260°C.
|
|
|
|
|
|
|
|
|
|
|
TJ36-CPSS-316U-12-SMPW-M
Type T, 304 SS 3/16" dia., 12" sheath, 36" lead wire.
Temperature range for sheath: 900°C
Temperature range for lead wire: 260°C
|
|
|
|
|
|
|
|
|
|
|
TJ36-CPSS-316U-6-SMPW-M
Type T, 304 SS 3/16" dia., 6" sheath, 36" lead wire.
Temperature range for sheath: 900°C
Temperature range for lead wire: 260°C.
|
|
|
|
|
|
|
|
|
|
|
TJ36-ICSS-316U-12-SMPW-M
Type J, 304 SS 3/16" dia., 12" sheath, 36" lead wire.
Temperature range for sheath: 900°C
Temperature range for lead wire: 260°C
|
|
|
|
|
|
|
|
|
|
|
TJ36-ICSS-316U-6-SMPW-M
Type J, 304 SS 3/16" dia., 6" sheath, 36" lead wire.
Temperature range for sheath: 900°C
Temperature range for lead wire: 260°C.
|
|
|
|
|
|
|
|
|
|
|
EC-20
Soil moisture probe, 0~40% VWC, 10" length with 16' cable
|
Type: Soil Moisture Probe
Weight: 3oz
|
|
|
|
|
|
|
|
|
EC-5
Soil moisture probe, 0~100% VMC, 2.1" length with 16' cable
|
Type: Soil Moisture Probe
Weight: 3oz
|
|
|
|
|
|
|
|
|
Anemometer
Wind speed sensor for use with the Pulse101 and Pulse110 data recorders.
|
Type: Weather Accessories
Weight: 3.5oz
|
|
|
|
|
|
|
|
|
RainGauge
Tipping-bucket rain gauge for use with the Event101 and Event110 data recorders.
|
Type: Weather Accessories
Weight: 125.1oz
|
|
|
|
|
|
|
|
|
BTIF1000
Bluetooth® interface for 1000 series data loggers
|
Type: Wireless Accessories
Weight: 5.1oz
|
|
|
|
|
|
|
|
|
RFEXT-BASE
RF extender base "PC EXPANSION PACK" Includes (1) wireless transceiver module, (1) antenna, (1) wall-mount power supply, (1)DB9 serial extension cable (for PC) and (1) software CD
|
Type: Wireless Accessories
Weight: 42oz
|
|
|
|
|
|
|
|
|
RFEXT-EXPANSION
RF extender, "EXPANSION MODULE" Includes (1) wireless transceiver module, (1) antenna, (1) wall-mount power supply, (1) remote interface cable (for data logger), and (1) DB9 serial expansion cable (for PC)
|
Type: Wireless Accessories
Weight: 42oz
|
|
|
|
|
|
|
|
|
RFEXT-KIT
RF Extender Kit, "STARTER KIT" includes (2) wireless transceiver modules,(2)antennas,(2)wall-mount power supplies,(1)remote interface cable(for data logger), (1)DB9 serial extension cable (for PC), and (1) software CD
|
Type: Wireless Accessories
Weight: 82oz
|
|
|
|
|
|
|
|
|
RFEXT-REMOTE
RF extender remote, "LOGGER EXPANSION PACK" Includes (1) wireless transceiver module, (1)antenna, (1)wall-mount power supply, and (1)remote interface cable(for data logger)
|
Type: Wireless Accessories
Weight: 42oz
|
|
|
|
|
|
|
